Table of Contents
Advertisement
• Make sure the unit is turned off and unplugged before
transporting the unit.
• The connection to the power supply must be made
by a qualified electrician in accordance with
IEC60364-1. It is recommended that the power
supply of this machine includes a residual current
device that interrupts power if the earth leakage
exceeds 30 mA for 30 ms or a device that will
homologate the earth circuit.
• Before assembling, dismantling, repairing,
transporting, servicing and storing, please check if
the appliance is disconnected from the power
supply.
• Handle the unit with care, do not drop it.
• Do not use the machine in extreme weather
conditions, when it is very cold. Do not use the
machine with ice water.
• Use the tool in a stable and plain location.
• The inlet hose can be connected to the water main
with a maximum pressure of 10 bars.
WARNING!
• In order to avoid any danger due to the accidental
reset of the thermal circuit breaker, this device must
not be powered via an external switch, such as a timer,
or be connected to a circuit which is regularly
switched on and off by the electricity supplier.
•The appliance must not be connected to a potable water
supply.
•
If the appliance is to be connected to a drinking water
supply (exclusively in Europe), an appropriate main
valve must be installed (type BA, standard EN1717).
9
Advertisement
Table of Contents
