Related Manuals for Energizer EZN1800
Summary of Contents for Energizer EZN1800
- Page 1 ORIGINAL INSTRUCTIONS HIGH PRESSURE WASHER EZN1800/EZN1800-UK EZN2000/EZN2000-UK EZN2200/EZN2200-UK USER GUIDE CAUTION Read the instructions before using the machine...
- Page 2 ©2020 Energizer. Energizer and certain graphic designs are trademarks of Energizer Brands, LLC and related subsidiaries and are used under license by Builder SAS.
- Page 3 Let’s get started. You’re excited to power up, so we’ll keep this brief!
-
Page 4: Table Of Contents
CONTENTS 1. SAFETY WARNINGS 2. INTENDED USE 3. SYMBOLS 4. ASSEMBLY INSTRUCTIONS 5. OPERATING INSTRUCTIONS 6. INFORMATION FOR USAGE 7. CLEAN-UP AND STORAGE 8. CLEANING TIPS 9. TECHNICAL DATA 10. TROUBLESHOOTING TIPS 11. WARRANTY 12. PRODUCT FAILURE 13. WARRANTY EXCLUSIONS 14. -
Page 5: Safety Warnings
1. SAFETY WARNINGS • Use this unit as described in this manual. Any mishandling and any use contrary to instructions shall in no case be the responsibility of the manufacturer. • Failure to observe the safety and operating instructions may result in a risk of electric shock, fire and/or personal injury. - Page 6 ▪ Do not touch the plug with wet hands. Do not allow the plug to fall into the water. ▪ Do not walk on the power cord, do not exert excessive pressure, or pull on the cord to avoid damage. WARNING! •...
- Page 7 WARNING! • High pressure hoses, fittings and couplings are important for the safety of the machine. Use only hoses, fittings and couplings recommended by the manufacturer. WARNING! • To ensure the safety of the machine, use only the original manufacturer’s parts or parts approved by the manufacturer. WARNING! •...
- Page 8 • Children, animals and persons not participating in the use of the machine must remain at a minimum distance of 10 metres from the sprayer. • The high pressure hose must remain connected to the com- pressor as long as the system is under pressure. •...
- Page 9 WARNING! • In order to avoid any danger due to the accidental reset of the thermal circuit breaker, this device must not be powered via an external switch, such as a timer, or be connected to a circuit which is regularly connected switched on and off by the electricity supplier.
- Page 10 WARNING! • Always switch off the mains disconnecting switch when leaving the machine unattended. • To avoid dangerous situations in the event of an accident (for example, contact with or spill of detergents) or equip- ment failure (such as a puncture or a component failure), please stop using the machine immediately.
-
Page 11: Intended Use
2. INTENDED USE Your high pressure washer can perform a myriad of tasks around the house and in the garden. It effectively cleans a wide variety of surfaces. Your pressure cleaner is designed to operate from a cold water supply. It operates efficiently with water temperature between 5°C and 40°C (between 41°F and 104°F). - Page 12 Waste electrical products should not be disposed of with household waste, please recycle where facilities exist. Check with your local authority or retailer for recycling advice. Recycle unwanted materials instead of disposing of them as waste. All tools, hoses and packaging should be sorted, taken to the local recycling centre and disposed of in an environmentally safe way.
-
Page 13: Assembly Instructions
4. ASSEMBLY INSTRUCTIONS 4.1 UNPACKING THE CARTON After opening the carton, please remove all parts and check them against the following list of components that are included: Models: Models: EZN1800 EZN2000 EZN1800-UK EZN2000-UK High pressure hose Water inlet connector Accessories holder... - Page 14 Models: EZN2200 EZN2200-UK High pressure hose Power cable hook Hose reel handle Gun holder Handle Hose reel Power washer unit Accessories holder Hose support Cleaning pin Pressure hose clip Water inlet connector Adjustable nozzle Due to transportation and packaging, some of the accessories may be supplied disassembled. Please follow the assembly instructions.
- Page 15 Screw the high pressure hose hook tight to the handle, then screw the handle tight to the main body (for model EZN1800/EZN1800-UK/EZN2000/EZN2000-UK). (Fig.2A & 2B) Install the two supports of the hose on the hose reel, and then install the handle to the hose reel. Then install the hose reel on the handle of the machine.
- Page 16 Fig.2B Models: EZN2200/EZN2200-UK STEP 2 Attach the high pressure hose to the pressure cleaner water outlet. Insert and quick-connect it tight to avoid leakage. When the pieces are joined properly, you cannot separate the two components by pulling straight out from the water outlet. Push the “Button” according to the direction of arrow, then you can pull out the high pressure hose.
- Page 17 Ensure water inlet hose is not damaged or leaking, the inner diameter of the hose must not be less than 1/2 inch and the length of the hose must not be longer than 8 metres. Models: Models: EZN1800 EZN2000/EZN2000-UK EZN1800-UK EZN2200/EZN2200-UK...
- Page 18 Surface cleaner • Screw the extension tube to the surface cleaner. • Insert the additional tube on the gun and then turn it anticlockwise to lock it in place. • To remove the accessory, push the extension tube and turn it clockwise to remove it. •...
-
Page 19: Operating Instructions
5. OPERATING INSTRUCTIONS WARNING! This unit is intended to be used with cold water only! Do not use hot water in this pressure cleaner! High pressure hose must not loop. WARNING! During operation the appliance must be positioned on a firm and stable surface. 5.1 STARTING UP WARNING! ALWAYS turn off the unit’s motor BEFORE turning off the unit’s water supply. -
Page 20: Information For Usage
5.3 CHANGING ACCESSORIES a) Release the trigger. b) Turn off the power switch (the position «O»).(Fig.6) c) Disassemble the accessory and assemble the other one (see “4. ASSEMBLY INSTRUCTIONS - Step 5”). WARNING! Never disconnect the high-pressure discharge hose from the machine while the system is still pressurized . To depressurize the unit, turn off the motor, turn off the water supply and squeeze the trigger 2-3 times. - Page 21 6.5 ADJUSTABLE SPRAY NOZZLE The adjustable nozzle will allow you to use any variety of spray patterns from a full fan spray (Fig.8 - Diagram 1) to a direct stream spray (Fig.8 - Diagram 2). When using the pressure washer to clean wood decks, siding, vehicles, etc., always start using the fan spray and begin spraying from a minimum 36”...
- Page 22 6.8 HOSE REEL For EZN2200 and EZN2200-UK models, there will be a hose reel fixed on the handle, you can wrap the hose around this hose reel and fix it tightly with a specified clip provided by the manufacturer when not in use. Fig.10 6.9 WATER INLET SCREEN The water inlet filter must be inspected regularly, so as to avoid blockage and restriction in the water supply...
- Page 23 6.11 USING DETERGENTS The pressure cleaner will dispense detergent at low pressure. Use the adjustable spray nozzle to rinse clean. Biodegradable detergents are specifically formulated to protect the environment and your pressure cleaner. These detergents will not clog the filter and will protect the internal parts of the pressure cleaner for a longer life.
-
Page 24: Clean-Up And Storage
7. CLEAN-UP AND STORAGE 7.1 SHUTTING DOWN THE PRESSURE CLEANER When finished using the pressure cleaner, follow these steps to shut down the unit: • Turn the pressure cleaner to the OFF position, unplug the power cord from the wall outlet. •... -
Page 25: Cleaning Tips
8. CLEANING TIPS WARNING! Always test the spray in an area free and clear of people and objects before you spray at the intended cleaning surface. 8.1 WOOD AND VINYL DECKS Rinse deck and surrounding area with fresh water. If using detergent, fill the detergent reservoir and apply to the area being cleaned at low pressure. -
Page 26: Technical Data
9. TECHNICAL DATA EZN1800/ EZN2000/ EZN2200/ Model EZN1800-UK EZN2000-UK EZN2200-UK Rated voltage AC 220-240V~ 50/60Hz Rated power 1800 W 2000 W 2200 W Rated pressure 10 MPa 11 MPa 12 MPa Allowable pressure 14 MPa 16 Mpa 17 MPa Rated flow 6.5 L/min... -
Page 27: Troubleshooting Tips
10. TROUBLESHOOTING TIPS WHEN THE SWITCH IS IN THE “I” POSITION THE MACHINE WILL NOT START PROBABLE CAUSE SOLUTION Electrical socket is faulty Check plug, socket, fuses Voltage is inadequate Check whether the voltage is adequate Power cord is not plugged in Plug in power cord THE PUMP DOES NOT REACH ADEQUATE PRESSURE OR FLUCTUATES PROBABLE CAUSE... -
Page 28: Warranty
11. WARRANTY WARRANTY The manufacturer guarantees the product against defects in material and workmanship for a period of 2 years from the date of the original purchase. The warranty only applies if the product is for household use. The warranty does not cover breakdowns due to normal wear and tear. The manufacturer agrees to replace parts identified as defective by the designated distributor. -
Page 29: Product Failure
12. PRODUCT FAILURE WHAT TO DO IF MY MACHINE BREAKS DOWN? If you bought your product in a store: a) Empty the fuel tank. b) Make sure that your machine is complete with all accessories supplied, and clean! If this is not the case, the repairer will refuse the machine. -
Page 30: Warranty Exclusions
13. WARRANTY EXCLUSIONS THE WARRANTY DOES NOT COVER: • Start-up and setting up of the product. • Damage resulting from normal wear and tear of the product. • Damage resulting from improper use of the product. • Damage resulting from assembly or start-up not in accordance with the user manual. •... -
Page 31: Declaration Of Conformity
We hereby declare that the design, construction and the model for the device with the standard and the requirements of safety and health of the EU’s consistent policy. The statement will prove ineffective if the device is being modified without our approval. Type of instrument: Pressure Cleaner • EZN1800/EZN1800-UK • EZN2000/EZN2000-UK • EZN2200/EZN2200-UK Serial number : 20210123222-20210123371 20210123372-20210123521 •... - Page 32 NOTES...
- Page 33 NOTES...