Table of Contents
Advertisement
6.5 ADJUSTABLE SPRAY NOZZLE
The adjustable nozzle will allow you to use any variety of spray patterns from a full fan spray (diagram 1) to a direct
stream spray (diagram 2). When using the pressure cleaner to clean wood decks, siding, vehicles etc., always start
using the fan spray and begin spraying from a minimum 36" away to avoid damaging the surface of the material you
are cleaning. Always begin by spraying in a testing area free and clear of people and objects. (Fig.6)
Fig.6
WARNING!
• High pressure jets can be dangerous if subject to misuse. The jet must not be directed at persons, live
electrical equipment or the appliance itself.
• Do not direct the jet against yourself or others in order to clean clothes or foot-wear.
6.6 SURFACE CLEANER
The surface cleaner allows efficient cleaning of terraces, paths and similar large surfaces. This function
provides the user with optimum splash protection. The high pressure nozzles in the cleaning housing are
rotated by water pressure. The housing and tight brushes close to the edge prevent splashing.
First, place the surface cleaner on the surface to be cleaned and turn on the high pressure cleaner, as
described above. Without too much pressure, guide the surface cleaner onto the surface to be cleaned.
ATTENTION: Never operate the spray gun trigger until the surface cleaner is placed on the surface to be
cleaned.
You can remove algae, moss and other dirt of the same type from terraces, paths and similar surfaces
without splashing.
6.7 WATER INLET SCREEN
The water inlet filter must be inspected regularly, so as to avoid blockage and restriction in the water supply
to the pump.
20
ORIGINAL INSTRUCTIONS >EN
Fig.7
Advertisement
Table of Contents
