Related Manuals for Energizer EZN1200
Summary of Contents for Energizer EZN1200
- Page 1 ORIGINAL INSTRUCTIONS >EN HIGH PRESSURE WASHER EZN1200 EZN1200-UK USER GUIDE CAUTION： Read the instructions before using the machine!
- Page 3 Let’s get started. You’re excited to power up, so we’ll keep this brief!
-
Page 4: Table Of Contents
CONTENTS 1. SAFETY WARNINGS 2. INTENDED USE 3. SYMBOLS 4. ASSEMBLY INSTRUCTIONS 5. OPERATING INSTRUCTIONS 6. INFORMATION FOR USAGE 7. CLEAN-UP AND STORAGE 8. CLEANING TIPS 9. TECHNICAL DATA 10. TROUBLE SHOOTING TIPS 11. DISPOSAL 12. DECLARATION OF CONFORMITY 13. WARRANTY 14. -
Page 5: Safety Warnings
1. SAFETY WARNINGS • Use this unit as described in this manual. Any mishandling and any use contrary to instructions for use shall in no case be the responsibility of the manufacturer. • Failure to observe the safety and operating instructions may result in a risk of electric shock, fire and/or personal injury. - Page 6 • The voltage indicated on the rating plate of the appliance corresponds to that of your electrical installation. • Do not disassemble the device yourself. Any disassembly, repair or inspection should be carried out exclusively by a qualified person. • Do not touch the plug with wet hands. Do not allow the plug to fall into the water.
- Page 7 • High pressure cleaners shall not be used by children or untrained personnel. WARNING! • The machine shall be disconnected from its power source during cleaning or maintenance and when replacing parts or converting the machine to another function. WARNING! •...
- Page 8 • If an extension cord is used, the plug and cable must be watertight. WARNING! • Inadequate extension cords can be dangerous. If an extension cord is used, it shall be suitable for outdoor use, and the connection has to be kept dry and off the ground.
- Page 9 • Make sure the unit is turned off and unplugged before trans- porting the unit. • The connection to the power supply must be made by a qualified electrician in accordance with IEC60364-1. It is recommended that the power supply of this machine includes a residual current device that interrupts power if the earth leakage exceeds 30 mA for 30 ms or a device that will homologate the earth circuit.
- Page 10 The water that will be passed through the valve is considered to be non-potable. WARNING! • When transporting the machine, take note of its weight. Do not overestimate your efforts and get help if necessary. • The machine must be transported from one point to another and disconnected.
- Page 11 or a component failure) please stop using the machine immediately. Check the problem. Have the machine inspected by a qualified technician. In the event of an overflow, move the machine away and clean the overflow. WARNING! • Always turn off the main switch when leaving the machine unattended.
-
Page 12: Intended Use
2. INTENDED USE Your high pressure washer can perform a myriad of tasks around the house and in the garden. It effectively cleans a wide variety of surfaces. Your pressure cleaner is designed to operate from a cold water supply. It operates efficiently with water whose temperature is between 5 and 40 degrees. -
Page 13: Assembly Instructions
3.1 SERVICING OF A DOUBLE-INSULATED APPLIANCE In a double-insulated product, two systems of insulation are provided instead of grounding. No means of grounding is provided on a double-insulated product, nor should a means for grounding be added to the product. Servicing a double-insulated product requires extreme care and knowledge of the system, and should be done only by qualified service personnel. - Page 14 Due to transportation and packaging, some of the accessories may be supplied disassembled. Please follow the assembly instructions.Always use the handle to transport the machine. STEP 1 A), Insert the extension wand(8) into the gun(9). Push and turn the extension wand(8) clockwise onto the gun(9) until hand tight to lock it in place.
- Page 15 STEP 4 Attach the high pressure hose(11)to the gun(9). Insert and quick-connect it tight to avoid leakage.When the pieces are joined properly, you cannot separate the two components by pulling straight out from the gun(11) Push the hose lock button, then you can pull out high pressure hose. STEP 5 Insert the detergent nozzle(5) into the gun(9).
-
Page 16: Operating Instructions
STEP 6 Attach the hose connector to pressure washer. Before attaching the connector to the male fitting, remove the plastic cap, which is inserted onto the male fitting on the pressure washer before shipping. This plastic cap can be discarded once removed. After both components have been installed, attach the garden hose with connector screw on the pressure washer. - Page 17 WARNING! Check that the supply voltage and frequency correspond to those specified on the appliance data plate.The appliance should only be connected to a main power supply via a security breaker (Max.30mA) to cut off the electricity supply in the instance of a short circuit. 5.2 STOPPING THE WASHER WARNING! ALWAYS turn off the unit’s motor BEFORE turning off the unit’s water supply.
-
Page 18: Information For Usage
6. INFORMATION FOR USAGE 6.1 THE SAFETY BUTTON OF GUN The operator need press the unlock button and then actuate the trigger to do the spray operation.When you release the trigger, it can return to the off position automatically. When not using the pressure cleaner, press the lock button to keep from accidentally engaging the high pressure spray. - Page 19 6.4 WATER INLET SCREEN The water inlet filter must be inspected regularly,so as to avoid blockage and restriction in the water supply to the pump. 6.5 ADJUSTABLE SPRAY NOZZLE The adjustable nozzle will allow you to use any variety of spray patterns from a full fan spray (diagram 1) to a direct stream spray (diagram 2).
-
Page 20: Clean-Up And Storage
7. CLEAN-UP AND STORAGE 7.1 SHUTTING DOWN THE PRESSURE CLEANER When finished using the pressure cleaner, follow these steps to shut down the unit: • Turn the pressure cleaner to the OFF position, unplug the power cord from the wall outlet. •... -
Page 21: Cleaning Tips
8. CLEANING TIPS WARNING! Always test the spray in an area free and clear of people and objects before you spray at the intended cleaning surface. WOOD AND VINYL DECKS Rinse deck and surrounding area with fresh water. If using detergent, fill the detergent reservoir and apply to the area being cleaned at low pressure. -
Page 22: Technical Data
9. TECHNICAL DATA EZN1200 / EZN1200-UK Model Rated voltage AC 220-240V~ 50/60Hz Rated power 1200W Rated pressure 7 MPa Allowable pressure 10 MPa Rated flow 5.5 L/min Max. flow 6.5 L/min Max. water inlet pressure 1.2 MPa Max. water inlet temperature 50°C... -
Page 23: Trouble Shooting Tips
10. TROUBLE SHOOTING TIPS WHEN THE SWITCH IS IN THE “I” POSITION THE MACHINE WILL NOT START PROBABLE CAUSE SOLUTION Electrical socket is faulty Check plug, socket, fuses Voltage is inadequate Check whether the voltage is adequate Power cord is not plugged in Plug in power cord THE PUMP DOES NOT REACH ADEQUATE PRESSURE OR FLUCTUATES PROBABLE CAUSE... -
Page 24: Disposal
EU’s consistent policy. The statement will prove ineffective if the device is being modified without our approval. Type of instrument: Pressure Cleaner • EZN1200/EZN1200-UK Serial number: 20210450772- 20210450871 / 20210450272- 20210450771 EU Directives: • EU Machinery Directive 2006/42/EC •... -
Page 25: Warranty
13. WARRANTY WARRANTY The manufacturer guarantees the product against defects in material and workmanship for a period of 2 years from the date of the original purchase. The warranty only applies if the product is for household use. The warranty does not cover breakdowns due to normal wear and tear. The manufacturer agrees to replace parts identified as defective by the designated distributor. -
Page 26: Product Failure
14. PRODUCT FAILURE WHAT TO DO IF MY MACHINE BREAKS DOWN? If you bought your product in a store: a) Empty the fuel tank. b) Make sure that your machine is complete with all accessories supplied, and clean! If this is not the case, the repairer will refuse the machine. -
Page 27: Warranty Exclusions
15. WARRANTY EXCLUSIONS THE WARRANTY DOES NOT COVER: • Start-up and setting up of the product. • Damage resulting from normal wear and tear of the product. • Damage resulting from improper use of the product. • Damage resulting from assembly or start-up not in accordance with the user manual. •...