Table of Contents
Advertisement
Adventus
User manual
10. Adjust the swing inertia by tightening or
loosening the screw (H) in the steering link.
Make sure the wheel is aligned with the
frame. If this needs to be adjusted start
by loosering the screw (P). Then loosen or
tighten the adjustment screws (I) to align the
wheel. Finish by tightening the screw (P).
WARNING!
The screw (P) must be tightened with a torque of
25-30Nm
Mechanical settings
I
Sida 14/18
P
H
Advertisement
Table of Contents
