decon Adventus User Manual page 12

Adventus
User manual
To customize Adventus
1. Measure the height from ground up to underneath the front tube of the wheelchair´s
footrest. Now set the angle postion (D) and wheelposition (G) according to the table below.
INFO!
Using the settings in the table below normaly results in lifting the front castors of the
wheelchair 30-40mm from the ground.
INFO!
The settings in the table below can vary between different wheelchair models and
manufacturers. The table shows a wheelchair where the footrest sits in an angle of
6-7degrees in relation to the ground.
Height footrest 0-30
[mm]
Angle position (D)
[D0, D1]
Wheel position (G)
[G1, G2, G3, G4]
D0
D1
Mechanical settings
30-50 50-70
D0 D0
G1 G2
Sida 12/18
70-90 90-100
D0 D0
G3 G4
100-
D1 D1
G3 G4
G1
G2
G3
G4