Exhaust Pipe/Muffler - Honda NX250 1989 Manuals

I

EXHAUST PIPE/MUFFLER

SEAT & FAIRINGS
EXHAUST PIPE/MUFFLER
• Do not service the exhaust pipe or muffler while they are hot.
REMOVAL/INSTALLATION
Remove the following:
— right side cover (page 1 5-2)
— joint nuts
— connecting band bolt
— exhaust muffler bolts
CAUTION
• Do not sit on the seat, after removing the muffler.
Install the exhaust pipe/muffler in the reverse order of removal.
(1) EXHAUST MUFFLER
45 N-m (4.5 kg-m
33 ft-lbl
38 N-m (3.8 kg-m,
27 ft-lb)
NOTE
After installing, make sure that there are no exhaust leaks.
15. FAIRING/EXHAUST SYSTEM
15-1 REAR CARRIER (AFTER '88)
15-2
22 N-m (2.2 kg-m, 16 ft-lbl
(51 CONNECTING BAND
(2) GASKET
15-3
(2) GASKET
ч
(31 JOINT NUTS
27 N-m {2.7 kg-m,
1 20 ft-lb)
•(4) EXHAUST
PIPE
15-1