Panasonic ZEQUO 6700RE Installation Manual page 13

POWER1 LED
POWER2 LED
S D C A R D
 POWER1 LED and POWER2 LED
Green Light
Off
 STATUS LED
Green Light
Green Blink
Orange Light
Orange Blink
Off
 SD CARD LED
Green Light
Green Blink
Orange Light
Off
 STACK ID LED
Indicating "H" and the STACK ID alternately : Master switch
Indicating "h" and the STACK ID alternately : Backup master switch
Indicating the STACK ID
*The following information is also displayed depending upon the device's state.
"P" : Power failure
"11" : Fan1 failure
"12" : Fan2 failure
"13" : Fan1 or Fan2 failure
"L" : Within 3 days after a loop resolution
 Port LED (SFP Port 1-24)
Green Light
Green Blink
Orange Light
Orange Blink
Off
 Port LED (Port 21-24)
Green Light
Green Blink
Orange Light
Orange Blink
Off
STACK ID LED
L E D S T A T U S L E D
: Power is ON.
: Power is OFF. Or, an internal power fault.
: The system is normally operating.
: There're one or some ports which are within 3 days after a loop resolution
: Starting up
: Malfunction (Contact the seller.)
: Power is OFF.
: SD card inserted
: Reading/writing data
: SD card error
: No SD card
: Link is established at 1000 Mbps.
: Transmitting and receiving data at 1000 Mbps.
: Shutting off due to loop detection and shutoff functions/storm controls/
BPDU guard
: Transmitting and receiving just the administration packets
: No devices are connected.
: Link is established at 10/100/1000 Mbps.
: Transmitting and receiving data at 10/100/1000 Mbps.
: Shutting off due to loop detection and shutoff functions/storm controls/
BPDU guard
: Transmitting and receiving just the administration packets
: No devices are connected.
: Slave switch
Port LED
13