Roroshetta SENSE User Instructions page 79

Sensor panel
If necessary (if there is a visible accumulation of dirt or grease) or
every three months: Wipe the sensor panel with a damp cloth and
a mild detergent.
Note Be especially careful to clean the openings for the sensors.
P
Openings for sensors
REPLACEMENT OF LED LIGHTING
Caution! Cut the power to the product by the circuit
breaker before installation and maintenance.
The LED lighting must be replaced with the original spare
part. Contact Customer service.
1. Slide the LED lighting to the side with grip tab and pull it
downwards.
Q
Removal of LED lighting
403100, 2022-06-07
CARE AND MAINTENANCE
2. Disconnect the plug from the LED lighting.
3. Connect the plug to the new LED lighting.
R
Connection of plug
4. Move the new LED lighting upwards and slide it to the side
without grip tab.
Note Make sure that the LED lighting snaps properly into place.
S
Fitting of LED lighting
EN
79