Virtual Server - TP-Link Archer C2 User Manual

Chapter 4
The TP-Link router includes four forwarding rules. If two or more rules are set, the
priority of implementation from high to low is Virtual Servers, Port Triggering, UPNP and
DMZ.
4. 7. 1.
When you build up a server in the local network and want to share it on the internet,
Virtual Servers can realize the service and provide it to internet users. At the same time
virtual servers can keep the local network safe as other services are still invisible from
the internet.
Virtual Servers can be used to set up public services in your local network, such as
HTTP, FTP, DNS, POP3/SMTP and Telnet. Different service uses different service port.
Port 80 is used in HTTP service, port 21 in FTP service, port 25 in SMTP service and port
110 in POP3 service. Please verify the service port number before the configuration.
I want to:
Downloaded from ManualsNet.com

Virtual Server

Share my personal website I've built in local network with my
friends through the internet.
For example, the personal website has been built in my home PC
(192.168.0.100). I hope that my friends on the internet can visit
my website in some way. My PC is connected to the router with
the WAN IP address 218.18.232.154.
Personal Website
1. Set your PC to a static IP address, for example 192.168.0.100.
2. Visit http://tplinkwifi.net, and log in with the username and
password you set for the router.
3. Go to
4. Click
Port
will be automatically filled in. Enter the PC's IP address
192.168.0.100 in the
search engine
Router
LAN
WAN: 218.18.232.154
Home
Forwarding > Virtual Server.
Add New. Select HTTP
list. The service port, internal port and protocol
IP Address
Configure the Router
from the Common Service
field.
35