Reboot; Password - TP-Link Archer C2 User Manual

Chapter 4
¾ To backup configuration settings:
Click Backup
of the current settings will be stored in your computer.
¾ To restore configuration settings:
1. Click
click Restore.
2. Wait a few minutes for the restoring and rebooting.
Note:
During the restoring process, do not power off or reset the router.

4. 16. 6. Reboot

1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to
Some settings of the router will take effect only after rebooting, including:
• Change the LAN IP Address (system will reboot automatically).
• Change the DHCP Settings.
• Change the Working Modes.
• Change the Web Management Port.
• Upgrade the firmware of the router (system will reboot automatically).
• Restore the router to its factory defaults (system will reboot automatically).
• Update the configuration with the file (system will reboot automatically).

4. 16. 7. Password

1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to
and password of the router.
Downloaded from ManualsNet.com
to save a copy of the current settings in your local computer. A ".bin" file
Choose File to locate the backup configuration file stored in your computer, and
System Tools > Reboot, and you can restart your router.
System Tools > Password, and you can change the factory default username
search engine
Configure the Router
64