TP-Link Archer C2 User Manual page 8

Chapter 1
The following parts (view from left to right) are located on the back panel.
Ethernet Ports (4/3/2/1)
Internet Port
Wi-Fi/WPS Button
Reset Button
Power On/Off Button
Power Port
Antennas
Downloaded from ManualsNet.com
Item
For connecting your PCs or other wired network devices to the router.
For connecting to a DSL/Cable modem, or an Ethernet port.
Press this button, and immediately press the WPS button on your device. The WPS
LED of the router should change from flashing to solid on, indicating successful WPS
connection.
Press and hold this button for more than 5 seconds to turn on or off the wireless
function of your router.
Press and hold this button until all the LEDs turn on momentarily to reset the router to
its factory default settings.
Press this button to power on or off the router.
For connecting the router to a power socket via the provided power adapter.
Used for wireless operation and data transmitting. Upright them for the best Wi-Fi
performance.
search engine
Get to Know About Your Router
Description
5