Setting Clock/Date; Visualization Of Temperature Probes B1,B2; Alarms Management - Parker Hyperchill-Plus ICEP007 User Manual

English
esc
7. Press the button " " three times to exit.
4.5.3 Differential setting (see fi g.1/2)
1.Turn the main swicth (QS) to "ON" and wait for the "OFF" visualiza-
tion.
esc
set
2.Press the buttons " " " " together to enter on the parameter
type "D"
3.Select the parameter "PAr"using " "and "
set
press the button " " to enter.
4. Select the parameter "tEr"using " "and "
set
press the button " " to enter.
5. Select the parameter "dIFI"using "
set
press the button " " to enter.
6. Change the value using " "and " " buttons and press the but-
set
ton " " to confi rm and exit.
esc
7. Press the button " " three times to exit.
4.5.4 Restore default parameters (see fi g.1/2)
1.Turn the main swicth (QS) to "ON" and wait for the "OFF" visualiza-
tion.
esc
set
2.Press the buttons " " " " together to enter on the parameter
type "D"
3.Select the parameter "PAr"using " "and "
set
press the button " " to enter.
4. Select the parameter "P_nA"using "
set
press the button " " to enter.
5. Select the parameter "dEF"using " "and "
set
press the button " " to enter.
6. Change the value "OFF" to "On" using "
set
and press the button " " to confi rm and exit.
esc
7. Press the button " " three times to exit.

4.6 Setting clock/date.

(see fi g. 1/3)
1. Press the buttons "
"FrEE".
2. Press the button "
3. Press the button "
4. Press the button "
" buttons and
"HOUr".
5. Press the button "
" buttons and
6. Select the fl ashing parameter "HOUr"/"dAtE"/"4EAr" using the
button "
"and " " buttons and
7. Change the fl ashing value using the buttons "
and down) and press the button "
8. Press the button "
9. Press the buttons "
Fig.3
dr4
" buttons and
"and " " buttons and
FrEE
" buttons and
esc
"and " " buttons
18.20
set
!
The memory of the "clock / date" has a maximum duration of
three days, so if the controller is left without power for more than
three days, the data set hour / month / year are lost.
Adjust the clock at the start up of the machine, and whenever
necessary.
ICEP007-024 (60Hz)
" " ", together to enter in the menu
set
" to enter in the menu "Ai".
" to enter in the il menu "CL".
set
" to enter and visualize the parameter
set
" until the fl ashes of the parameter "HOUr".
set
" and press " " to enter.
"and "
set
" to confi rm.
esc
" to return to the menu "FrEE".
" " " together to exit.
set
FrEE Ai
set
HOUr
set
4EAr HOUr
dAtE
set set
set
01.09 17.15
2015

4.7 Visualization of temperature probes B1,B2

(see fi g.1/4)
Fig.4
b1
1. Turn the main swicth (QS) to "ON" and wait for the "OFF" visualiza-
" (up
tion.
set
2. Press the button " " to start up.
3. The display shows the temperature of the probe B1.
4. Using " "and " " buttons select the probe (B2), wait for 3
seconds to see the temperature value.
esc
5. Press the button " " to exit

4.8 Alarms management

CL (see fi g.1/5)
Fig.5
ALARM
!
3 sec.
set
1. Press the button " " to start up.
!
2. Alarm ON (led on: red).
set
3. Press the button " " to enter in the menu, using "
buttons select the parameter " AL" .
6 / 8
set
12.5
b2
3
sec.
5.0
set
23.5
set
Pb
AL
set
Er__ Er__
"and " "