Philips HQ912 User Manual page 12

EnglisH
Clean the shaver after every use (see chapter
5
'Cleaning').
Put the protection cap on the shaver to prevent
6
damage to the shaving heads (Fig. 8).
Note: Make sure that the lug of the protection cap covers the
release button.
Cleaning
Never use scouring pads, abrasive cleaning agents or
aggressive liquids such as petrol or acetone to clean the
appliance.
Be careful with hot water. Always check if the water is not
too hot, to avoid burning your hands.
Regular cleaning guarantees better shaving performance.
The easiest and most hygienic way to clean the appliance
is to rinse the shaving unit and the hair chamber with hot
water every time you have used the appliance.
19
After every use: shaving unit and hair chamber
Switch off the shaver, remove the adapter from the
1
wall socket and pull the appliance plug out of the
shaver.
Rinse the outside of the shaving unit under a hot tap
2
for some time (Fig. 9).
Press the release button (1) and pull the shaving
3
unit in a straight upward movement off the shaver
(2). (Fig. 10)
Rinse the inside of the shaving unit under a hot tap
4
for some time (Fig. 11).
Rinse the hair chamber under a hot tap for some
5
time (Fig. 12).
Put the shaving unit back onto the shaver (Fig. 13).
6
Every two months: shaving heads
Note: Do not use cleaning agents or alcohol to clean the
shaving heads. Only use HQ110 Shaving Head
Spray.
EnglisH
Cleaning
20