Figure 36. Remove the camera board
Go to
https://support.lenovo.com/partslookup
replacement parts:
Camera board
Removable tape
Remove the sensor board (with cable)
Make sure the following FRUs (CRUs) have been removed.
"Remove the LCD module" on page 44
"Remove the strip cover" on page 46
"Remove the LCD panel" on page 47
Step 1.
Disconnect the sensor board cable from the camera board and disconnect the EDP cable from the
sensor board. Remove the sensor board (with cable).
Figure 37. Remove the sensor board (with cable)
Go to
https://support.lenovo.com/partslookup
replacement parts:
Sensor board (with cable)
Removable tape
to look up the Lenovo part numbers of the following
to look up the Lenovo part numbers of the following
.
Chapter 4
Removing a FRU or CRU
51