Remove The Camera Cable; Remove The Touch Panel Cable And Sensor Board - Lenovo Flex 7i Hardware Maintenance Manual

Removable tape

Remove the camera cable

Make sure the following FRUs (CRUs) have been removed.
"Disassemble the LCD unit" on page 46
"Remove the hinge cover" on page 46
"Remove the LCD panel and EDP cable" on page 46
"Remove the camera" on page 50
Step 1. Detach the camera cable connectors then remove the camera cable.
Figure 42. Detach the camera cable connectors then remove the camera cable
Go to https://support.lenovo.com/partslookup
replacement parts:
Camera cable
Removable tape

Remove the touch panel cable and sensor board

Make sure the following FRUs (CRUs) have been removed.
"Disassemble the LCD unit" on page 46
"Remove the hinge cover" on page 46
"Remove the LCD panel and EDP cable" on page 46
"Remove the camera" on page 50
Step 1. Peel off the tape.
to look up the Lenovo part numbers of the following
.
Chapter 4 Removing a FRU or CRU
51