Table of Contents
Advertisement
Ethernet copper port and fiber port indicator are connected normally, but
3.
can't transmit data, what's the reason?
When the system is power on or network configuration changes, the device and
switch configuration in the network will need some time. Troubleshooting, after
the device and switch configuration are completed, Ethernet data can be
transmitted; if it's impassable, power off the system, and power on again.
4.
The switch halts after communicate for a period time, and returns to normal
after reboot, what's the reason?
Reasons may include:
-
Surrounding environment disturbs the product; troubleshooting, product
grounding adopts shielding line or shields the interference source.
-
Site wiring is not normative; Troubleshooting, optical fiber, network cable,
optical cable cannot be arranged with power line and high-voltage line.
-
Network cable is disturbed by static electricity or surge; Troubleshooting,
change the shielded cable or install a lightning protector.
-
High and low temperature influence; troubleshooting, check the device
temperature usage range.
3onedata proprietary and confidential
Copyright © 3onedata Co., Ltd.
User Manual
24
Advertisement
Table of Contents
