Optional Accessories - Makita VC2211M Instruction Manual

Assembling the air filter
When you get the air filter components separately,
assemble them as follows.
► Fig.23: 1. Powder filter 2. Damper 3. Prefilter
Put the prefilter over the powder filter.
► Fig.24
Make sure that the borders of prefilter and powder filter
are set properly.
Installing the air filter
► Fig.25
Wipe off the seal face.
Set the new air filters and fix them with the filter hooks.
Flip the stopper lever to lock the air filters.
Set the tank cover onto the tank and lock it with hooks.
► Fig.26
NOTICE:
• Make sure the hooks on the filters are set at the
correct position.
Cleaning the level sensors
► Fig.27: 1. Level sensors
The level sensors detect liquid when the tank becomes
full with liquid. Clean the level sensors with a soft cloth
from time to time when changing the air filters.
Cleaning the air filters
Clogged filter causes poor suction performance.
Clean out the filters from time to time.
To remove dust or particles adhering to the filters,
remove the prefilter from the air filter. And tap the prefil-
ter several times.
► Fig.28
Occasionally wash the powder filter in water, rinse and
dry thoroughly in the shade before use. Never wash
filters in a washing machine.
NOTE:
• Do not rub and scratch the powder filter, the
prefilter, or damper with hard objects such as a
brush and a paddle.
• The filters are consumable and are recom-
mended to have some spares for them.
Storage of power supply cord
► Fig.29: 1. Power supply cord 2. Multi-hook
► Fig.30: 1. Power supply cord 2. Base hook
Wind up the power supply cord around the multi-hook or
the base hook.
Storage of accessories
NOTE:
• Do not apply an excessive force to the accesso-
ries that are held by the pipe holder. Applying an
excessive force to these accessories may cause
damage to the pipe holder.
► Fig.31
Pipe rest can be used to store straight pipe, bent pipe
and others by just inserting these accessories.
► Fig.32
The pipes can be placed into the pipe holder when also
stopping using the cleaner on the way for a while.
► Fig.33
You can place the cap in multi hook while the hose is
connected to the tool.
Storage of hose
► Fig.34
► Fig.35: 1. Hose
The hose can be placed on either base hook or
multi-hook.
To maintain product SAFETY and RELIABILITY, repairs,
any other maintenance or adjustment should be per-
formed by Makita Authorized Service Centers, always
using Makita replacement parts.
OPTIONAL
ACCESSORIES
CAUTION:
• These accessories or attachments are recom-
mended for use with your Makita tool specified
in this manual. The use of any other accessories
or attachments might present a risk of injury to
persons. Only use accessory or attachment for
its stated purpose.
If you need any assistance for more details regard-
ing these accessories, ask your local Makita Service
Center.
• Hose
• Front cuffs (22, 24, 38)
• Straight pipe
• Corner nozzle
• Round brush
• Powder filter
• Damper
• Prefilter
• Nozzle assembly
• Bent pipe
• Polyethylene bag
• Filter bag
• Hose band
• Belt hook complete
• Cap
NOTE:
• Some items in the list may be included in the
tool package as standard accessories. They
may differ from country to country.
13 ENGLISH