Setting Consumable Replacement Reminders - ELGA MEDICA Pro EDI Operator's Manual

ELGA
DI LC207 replacement date screen
CVF replacement date screen
UV replacement date screen
3.3

Setting Consumable Replacement Reminders

Step 1 - Enter consumable replacement timer set-up
1.
Note:
2.
3.
Step 2 – Purification Pack (LC207) replacement date
1.
2. PRESS ✔ to confirm that resetting is required
3. PRESS ✔ .
Step 3 – Composite Vent filter (CVF) LC136M2 replacement
1.
2.
3.
Step 4 - UV lamp (LC105) replacement date
1.
2.
3.
MEDICA Pro EDI MANU39885 Ver 1 – 05/12
TURN unit off at electrical supply.
Allow time for the display to go blank after the
power is removed.
SWITCH electrical supply on.
PRESENT Master Key and PRESS
the Consumable Timer set up.
PRESS button to reset cartridge replacement date
OR
PRESS ✔ to accept replacement date and proceed to
CVF Reminder.
OR
PRESS ✗ to abort reset.
date
PRESS button to reset CVF replacement date
OR
PRESS ✔ to accept date and proceed to UV lamp
Reminder.
PRESS ✔ to confirm that resetting is required
OR
PRESS ✗ to abort reset.
PRESS ✔ .
PRESS button to reset UV lamp replacement date
OR
PRESS ✔ to accept replacement date and proceed to
Protek Filter Replacement.
PRESS ✔ confirm that resetting is required
OR
PRESS ✗ to abort reset.
PRESS ✔ .
MEDICA Pro EDI Operator Manual
button to enter
Page 15