Setting Display And Consumable Replacement Reminders - ELGA Medica EDI 15 Operator's Manual

MEDICA EDI 15/30 Operator Manual
Stand-by screen
Page 20
6.7 Setting Display and Consumable Replacement
Reminders
From the stand-by screen, press the right hand touch pad button to
enter the replacement date screen.
CAUTION!
Press
button
Step 1 – Composite Vent Filter (CVF) LC136M2 replacement
date
Setting this screen will cause the CVF timer to reset to the
value preset within section 6.6 step 10.
1. PRESS
(proceed to operation 2).
PRESS ✔ to accept date and proceed to Step 2.
2. PRESS ✔ to confirm that resetting is required
PRESS ✗ to abort reset.
3. PRESS ✔.
Step 2 - UV Lamp (LC105) replacement date
Setting this screen will cause the UV Lamp timer to reset to
the value preset within section 6.6 step 11.
1. PRESS
2. PRESS ✔ confirm that resetting is required
3. PRESS ✔.
Step 3 - Pre-treatment Filter replacement date
Setting this screen will cause the Pre-treatment filters timer to
reset to the value preset within section 6.6 step 12.
1.
2.
3.
MEDICA EDI 15/30 Version 1 05/16
Before re-setting any of the cartridge
timers, ensure that the appropriate new
cartridges have been installed and secured
correctly in the MEDICA EDI 15/30.
button to reset CVF replacement date
OR
OR
button to reset UV lamp replacement date
(proceed to operation 2)
OR
PRESS ✔ to accept replacement date and proceed to
Step 3.
OR
PRESS ✗ to abort reset.
PRESS button to reset PT replacement date
(proceed to operation 2)
OR
PRESS ✔ to accept replacement date and proceed to
Step 4.
PRESS ✔ confirm that resetting is required
OR
PRESS ✗ to abort reset.
PRESS ✔.
ELGA