Connections; Grounding Screw; Power Supply; Table 3 Legend For Figure "Label - WAGO 852-112/000-001 Manual

Properties
Custom Name
Item-No.
Serial No.

4.3 Connections

4.3.1 Grounding screw

The switch must be grounded. Connect the grounding screw to the ground potential. Do
not operate the switch without an appropriately installed protective earth conductor.

4.3.2 Power Supply

The female connector (Order No. 2231-102/026-000) can easily be connected to the 2-
pole male connector located on the top of the industrial ECO switch.
The male connector shows the following pin assignment:
16 Product manual | Version: 1.0.0
Industrial Eco Switch
Description
Item number
Device serial number
Firmware version (left number sequence) (01)
Hardware version (right number sequence) (01)
852-112/000-001
Figure 3: Label
Table 3: Legend for Figure "Label"
Figure 4: Grounding screw
Figure 5: Power Supply (PWR) Port