Other Afdh Drive Package Accessories - Trane AFDH Installation Instructions Manual

Note: Shorting buss bars that could be required for a
upgrade AFDH drive installation are not included
within the Tracer® AdaptiView™ miscellaneous
hardware package kit. Use the buss bars that best
match the spacing and size of the compressor
motor terminal lugs on the specific chiller receiving
the drive upgrade.
Figure 15. Buss bars specifications; CH531/Tracer
AdaptiView hardware packages
1. Example of shorting buss bars contained in kit BAR0177
2. Example of shorting buss bars contained in kit BAR0163
3. Example of shorting buss bars contained in kit BAR00176
4. Example of shorting buss bars contained in kit BAR00165

Other AFDH Drive Package Accessories

Motor panel transition covers
• It is possible to order a complete new motor panel
transition cover assembly if one is needed, either as
part of the drive package order or separately if
necessary.
• The transition cover assembly when properly
installed, prevents direct access to the output motor
lead sections that emerge from the access cutout at the
back of a unit-mounted or stand-mounted AFDH drive,
and connect to the compressor motor terminal board.
Table 29. Part numbers for motor panel transition covers
Part Description
6-inch motor panel transition cover
assembly
12-inch motor panel transition cover
assembly
18-inch motor panel transition cover
assembly
AFDH-SVN005B-EN
Trane Part # Mnemonic #
506820000100 COV02946
506859440100 COV03203
506819750100 COV02945
AFDH Drive Package Specifications
35