gCreate gMax 2 PRO Quick Start Manual page 15

Water Soluable (PVA) Support Material
You can use the gMax 2 PRO dual extruder to print
your part out of one material and the support
material out of water soluable PLA material. This
support can then be dissolved away in water for a
cleaner surface finish.
Simplify3D
Simplify 3D Support Se ngs
P PLA 3D Print
S Solid PVA Top Layer
1. Fo 1. Follow the previous example se ngs for Dual Extrusion
pr prin ng.
2. Ma 2. Make sure to increase the interferance layer density of
th the PVA support material to 100% and the distance from
the part to zero. Below are addi onal se ngs to keep an
eye out for.
Cura Support Se ngs
P PVA Support
Pg 14