TSI Instruments AEROTRAK 9306 Quick Start Manual

TSI Instruments AEROTRAK 9306 Quick Start Manual

Handheld airborne particle counter
Hide thumbs Also See for AEROTRAK 9306:

Advertisement

Quick Links

Q
S
UICK
TART
A
T
Model 9306
ERO
RAK
Handheld Airborne Particle Counter
Thank you for purchasing a TSI A
9306 Handheld Airborne Particle Counter (particle
counter). This guide will help you quickly begin
using your particle counter.
More detailed information is in the manual located
on the included TrakPro Lite CD. Please refer to
the manual if you have questions on the operation
of your new particle counter.

Safety

This section gives instructions to promote safe and
proper handling of the A
Airborne Particle Counters.
I M P O R T A N T
There are no user-serviceable parts inside the
instrument. Refer all repair and maintenance to a
qualified factory-authorized technician. All maintenance
and repair information in this manual is included for use
by a qualified factory-authorized technician.
L A S E R S A F E T Y
The Model 9306 Handheld Airborne Particle Counter is a
Class I laser-based instrument. During normal operation,
you will not be exposed to laser radiation. However,
precaution should be taken to avoid exposure to
hazardous radiation in the form of intense, focused,
visible light. Exposure to this light may cause blindness.
DO NOT remove any parts from the particle counter
unless you are specifically told to do so in this manual.
DO NOT remove the housing or covers. There are no
user-serviceable components inside the housing
G
UIDE
T
Model
ERO
RAK
T
Handheld
ERO
RAK
H a n d h e l d P a r t i c l e C o u n t e r s
The use of controls, adjustments, or
procedures other than those specified in
this manual may result in exposure to
hazardous optical radiation.
W A R N I N G
The battery supplied by TSI (700032) has built in
protection against explosion and fire hazard. Do not use
a substitute. Do not use non-rechargeable batteries in
this instrument. Fire, explosions, or other hazards may
result.

Labels

Advisory labels and identification labels are
attached to the outside of the particle counter
housing and to the optics housing on the inside of
the instrument.
Serial Number
Label (back
panel)
Laser Radiation
Label (internal)
VISIBLE LASER RADIATION WHEN
WARNING: NO USER SERVICABLE
PARTS INSIDE. REFER SERVICING
TO QUALIFIED PERSONNEL
European symbol
for non-
disposable item.
Item must be
recycled.
DANGER!
OPEN. AVOID DIRECT
EXPOSURE TO BEAM

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AEROTRAK 9306 and is the answer not in the manual?

Questions and answers

Summary of Contents for TSI Instruments AEROTRAK 9306

  • Page 1 H a n d h e l d P a r t i c l e C o u n t e r s UICK TART UIDE Model 9306 ™ Handheld Airborne Particle Counter ™ Thank you for purchasing a TSI A Model The use of controls, adjustments, or 9306 Handheld Airborne Particle Counter (particle...
  • Page 2 Unpacking Item Description Part/Model Reference Picture 1. Carefully unpack the particle counter from the Operation 6002278 (installed on shipping container and verify that all the items and Service ™ Lite CD) Manual listed in the following table are present. 2. Contact TSI immediately if items are missing or Calibration certificate broken.
  • Page 3 14. After a splash screen displays the TSI logo, a ® brief start-up sequence begins as the Windows CE operating system boots up. 15. The instrument is ready for operation when the Main screen appears. 16. To turn the power off, hold the On/Off button down for more than 5 seconds.
  • Page 4 Set up Sampling 27. The Main tab is updated as samples are collected. 23. From the Main tab, select the Setup tab, then select Sampling. The Sample Timing Screen Reviewing Data appears. 24. This screen lets you select parameters for 28.

This manual is also suitable for:

Aerotrak 9306-01Aerotrak 9306-02Aerotrak 9306-v

Table of Contents