Table of Contents
Advertisement
Making/Answering Calls
Flash time
The flash time depends on your
telephone exchange or host PBX. You
can select the following flash time: 80
ms, 100 ms, 200 ms, 300 ms, 400 ms,
500 ms, 600 ms, and 700 ms.
The default setting is "600 ms".
Important:
L Make sure that the unit is in standby
mode.
1
Press {MENU/SET}.
2
Select "Phone Setup", then press
{MENU/SET}.
3
Select "Flash Time", then press
{MENU/SET}.
➔Flash Time
Hold Reminder
Handsfree Mode
[V/^]:Scroll
4
Select the desired setting, then press
{MENU/SET}.
Flash Time
=600 ms
[SET]:Save
[V/^]:Change
5
Press and hold {MENU/SET} to
return to standby mode.
Note:
L To return to the previous menu, press
{<}.
L If you are connected via a PBX, a
longer flash time may be necessary to
use PBX functions (transferring a call,
etc.). Consult your PBX installer for
the correct setting.
30
For assistance, please visit http://www.panasonic.com/phonehelp
Temporary tone dialing (for
rotary/pulse service users)
You can temporarily switch the dialing
mode to tone when you need to access
touch tone services (for example,
answering services, telephone banking
services, etc.).
Press {*} (TONE) before entering
access numbers which require tone
dialing.
Recording a telephone
conversation
You can record your conversation while
on an outside call.
1
During an outside call, press
{REC/ERASE ALL}, then press
{MENU/SET}.
2
To stop recording, press
{MENU/SET} again.
Note:
L Many states have imposed regulations
on the manner in which 2-way
telephone conversations may be
recorded, so you should inform the
other party that the conversation is
being recorded. Consult your local
telephone company for further
information.
L Recorded conversations are treated
as new messages.
L To listen to the recorded conversation,
see "Listening to messages" on
page 60.
L If the message memory becomes full,
"Memory Full" will blink and
recording will stop. Erase unnecessary
messages (see "Erasing a message"
on page 61).
L The recording time of the telephone
conversation does not have limitation.
L If there is no sound recorded for a
while, recording mode will end.
Advertisement
Table of Contents
