Voice Memo; Recording A Voice Memo - Panasonic KX-TS4300 Operating Instructions Manual

Erasing a message
1
Press {ERASE} during playback.
2
Select "Yes?", then press {ERASE}
or {MENU/SET}.
L To cancel, select "No?", then press
{MENU/SET}.
Erasing all messages
Important:
L Make sure that the unit is in standby
mode.
1
Press {REC/ERASE ALL}.
2
Select "Erase All MSG", then
press {MENU/SET}.
TAD Operation
➔Erase All MSG
TAD Ans-OGM
[V/^]:Scroll
3
Select "Yes?", then press {ERASE}
or {MENU/SET}.
Erase All MSG
All Message:19
Erase All
Yes?
L To cancel, select "No?", then press
{MENU/SET}.
4
Press {REC/ERASE ALL} to return
to standby mode.
Note:
L To return to the previous menu, press
{<}.
For assistance, please visit http://www.panasonic.com/phonehelp

Voice memo

Recording a voice memo

You can use the unit to leave a voice
memo (voice message) for yourself or
someone else. Voice memos can be
played back later with the same
operation used to play back answering
system messages.
Important:
L Make sure that the unit is in standby
mode.
1
Press {REC/ERASE ALL}.
2
Select "Record Memo", then press
{MENU/SET}.
TAD Operation
➔Record Memo
Erase All MSG
[V/^]:Scroll
3
After the unit beeps, speak clearly
about 20 cm (8 inches) away from
the MIC.
4
To stop recording, press
{MENU/SET}.
5
Press {REC/ERASE ALL} to return
to standby mode.
Note:
L To return to the previous menu, press
{<}.
L The recording time of the voice memo
(voice message) doesn't have
limitation.
L If there is no sound recorded for a
while, recording mode will end.
Answering system
61