3.4
FACTORY DEFAULT RESET Button
The camera has a FACTORY DEFAULT RESET button.
FACTORY DEFAULT RESET button
(Press the button with a pointed object)
Pressing the FACTORY DEFAULT RESET button resets the camera to factory
default. If you lose your user name and password, use this button to reset the
camera.
•
Press the FACTORY DEFAULT RESET button for 1 second when the camera
is on.
•
The indicator blinks orange, and then turns off for 5 seconds.
•
Do not turn off the camera until the indicator lights green.
Note
•
The internal clock will not be reset, but the time format will return to AM/
PM mode (see page 63). Set it again.
•
See page 122—page 129 for default settings.
•
All buffered images on the internal memory are deleted when resetting the
camera to factory default.
•
The reset operation takes about 1 minute.
[For assistance, please call: 1-800-272-7033]
Operating Instructions
121