Panasonic KX-HCM280A Operating Instructions Manual page 41

DHCP Setup
• Clicking [Cancel] takes you back to the previous page without
saving changes.
4.
Click [Save] when finished.
• New settings are saved.
• When finished, the following page is displayed.
Note
The current network settings are shown on the Status page in the Maintenance
section (see page 109).
5.
Click [Restart].
• The camera restarts, and the Top page is displayed.
Note
• When you do not know the camera IP address while setting [Automatic
Setup] or [DHCP Setup], you can search it by using the Setup Program
(see page 132).
[For assistance, please call: 1-800-272-7033]
Static Setup
Operating Instructions
41