Viewing Single Camera Page - Panasonic KX-HCM280A Operating Instructions Manual

1.2

Viewing Single Camera page

1.
Access the camera (see page 11).
• The Top page is displayed.
2.
Click the [Single] tab at the top of the page.
• When Security Warning window is displayed, click [Yes] (see page 16).
• See page 17 for Security Warning window when using Microsoft Windows
XP Service Pack 2.
Capture Image
Button
(see page 20)
Operation Bar
(see page 21)
Refresh Interval
(see page 21)
3.
Close the web browser.
Note
• Refresh interval is [Motion] by default. You can change it on the operation
bar (see page 21).
• Refresh interval may change depending on the network condition, PC
performance and what object you view. IPsec will also slow refresh
interval.
• When displaying video (Motion JPEG), the camera allows up to 30
simultaneous accesses. When trying more than 30 accesses, the 31st
user will see a gray screen. (Maximum 30 accesses for a Buffered Image
page too.)
• To reduce the data traffic, the video can be automatically changed to
refreshing still images on the General User page (see page 75).
• To display the Single Camera page directly, add it to the [Favorites] on the
web browser.
• When you view a dark image, enable the color night view mode on the
Camera Setup page (see page 65). The image will be brighter, but the
refresh interval may slow down and image quality may decrease in a dark
place.
Pan / Tilt
Scan
Zoom
Focus
Preset Program
Alarm
Brightness
-
STD
Output
Open
Short
Refresh Interval
Motion
Resolution
640 480
X
∗
320 240
X
Image Quality
Favor Clarity
∗
Standard
Favor Motion
[For assistance, please call: 1-800-272-7033]
Network Camera
Please click here when gray color screen displayed
+
Running in IPv4 mode.
Operating Instructions
Click to
Center
(see page 19)
Camera Image
The banner is
displayed.
(see page 18)
15