Mounting Parts; How To Use - Black & Decker Spacemaker ODC440 Use And Care Book Manual

Product may vary slightly from what is illustrated.
1. Digital display
2. Control panel
3. Reservoir cover
† 4. Water reservoir with level markings
(Part # ODC440-01 model ODC440), (Part # ODC440B-01 model ODC440B)
† 5. Carafe (Part # ODC440-03 model ODC440); (Part # ODC440B-03 model ODC440B)
† 6. Carafe lid
(Part # ODC440-04 model ODC440); (Part # ODC440B-04 model ODC440B)
7. Sneak-A-Cup® interrupt drip stop (under basket)
† 8. Brew Basket
(Part # ODC440-02 model ODC440); (Part # ODC440B-02 model ODC440B)
(Part # ODC450-01 model ODC450)
† 9. Mounting bracket (Part # ODC440-06)
† Consumer replaceable/removables parts
THIS UNIT COMES WITH AN INSTRUCTION SHEET FOR MOUNTING. SEE ATTACHED
INSTRUCTION SHEET FOR DETAILS.

MOUNTING PARTS

All manuals and user guides at all-guides.com
† Mounting parts
(Part # ODC440-06)
10. 4 shorter screws
(non overhanging cabinets)
11. 8 hexagonal nuts
12. Set of 20 spacers
13. 4 screws
3

How to Use

This product is for household use only.
Before First Use
1. Depress water reservoir release button
Remove and inventory all packing mat
2. Brew 12 cups of fresh water through th
instructed in Brewing Coffee, but do no
3. When water has brewed through, press
4. Clean water reservoir, filter basket, car
Brewing Coffee
Note: Time display will flash when you p
during or after brewing. (See Setting the C
clock before brewing.
1. Remove filter basket. Place filter inside
one heaping tablespoon for every cup.
2. Depress water reservoir release button,
cold water through lid to desired cup l
reservoir into unit until it snaps into pla
3. Replace empty carafe and be sure it is
lever at the back.
4. Press ON/OFF button. "On" appears at
see Setting the Clock/Timer.)
5. After you finish brewing and serving, p
Sneak-A-Cup® Interrupt Feature lets you
Note: Carafe must be replaced under filte
overflow.
Caution: Do not pull out filter basket whe
coffee.
Setting the Clock/Timer
You may set the clock before, during or a
To set current time: Press the HOUR, the
current time. Hold down buttons to advan
Setting the Auto Brew Function
1. Set auto-on time: Press the PROG butt
auto-brew time is being set.)
2. Press HOUR and MIN buttons until yo
Display will return to real time after a f
To check pre-set auto-on time: Press PRO
a few seconds as PROGRAM flashes. Wh
automatically return to real time.
3. Follow steps 1-3 for Brewing Coffee.
4. Press AUTO button. The word AUTO w
begins at pre-set auto-on time. AUTO w
appears.
4