[Eng] Appearance And Specifications Of A Device - NetPing 4/PWR-220 v4/SMS User Manual

[ENG] Appearance and Specifications of a Device

Picture 1 Front appearance of a device with a plugged 1-Wire temperature sensor
Sockets, LEDs and controls at the front panel:
1. Sockets for connecting sensors of the 1-Wire standard (temperature, humidity sensors);
2. LED indicators of a status of power supply channels;
3. Ethernet ports 10/100 BASE-TX with CPU and LINK LEDs;
4. LED indicator of a GSM signal;
5. A slot for inserting the SIM card;
6. A socket for plugging in a GSM antenna;
7. «Reset» button for resetting parameters to default values
CPU LEDs near Ethernet ports glow constantly when a device is powered, and flash when transferring packages to
the network.
LINK LED near an Ethernet port glows constantly when there is a connection at a corresponding port, and flashes
from time to time when receiving packages from the network.
LED indicators of a status of power supply channels are numbered corresponding to a numeration of output sockets
of power supply channels at the back panel of a device (Picture 4).
[ENG] NetPing 4/PWR-220 v4/SMS, User guide -[ENG] Appearance and Specifications of a Device
Picture 2 Front panel of a device
[ENG] Appearance and Specifications of a Device
–