NetPing 4/PWR-220 v4/SMS User Manual page 14

[ENG] NetPing 4/PWR-220 v4/SMS, User guide -[ENG] Plugging, Installing and Initial Configuring of a Device
CPU LEDs lighting near the Ethernet ports at the front panel of a device will be an indicator for power
availability.
While a device is initializing, LEDs will blink several times indicating turning a device on, afterward they will glow
permanently.
7. Plug a device into the office Ethernet network into any available Ethernet port of a switch.
LINK LED lighting near a corresponding Ethernet port at the front panel of a device will mean that a connection
was established successfully.
The second Ethernet port may be used for connecting any Ethernet devices in the chain, including other NetPing
devices.
[ENG] Plugging, Installing and Initial Configuring of a Device
–