Table of Contents
Advertisement
7.1 Web Access
In order to view the keyboard from a network it must be connected to a LAN or internet.
①
The network setup should be done accordingly.
The keyboard shall be powered on and connected to the network. Please see 2.5
②
Local IP Setup for details.
Set the local IP address and HTTP port. The default local IP address is
192.168.001.201 and the default HTTP port is 4000. You shall add the port
number when typing IP address in IE address blank as
③
http://192.168.001.201:4000 into IE browser.
Enter the password in the subsequent window (the default password is 123456).
Please make sure the IP address of the web client is in the same local network as
v
that of the keyboard. If the IP address of the keyboard is 192.168.001.201, the IP
address of the IP client must be 192.168.001.XXX.
Some models may be searched by IP-Tool. Make sure the PC and keyboard are
v
connected to the LAN and double click the IP-Tool icon to run this software. Then
the keyboard can be searched; if the keyboard cannot be searched, please
check whether the PC and the keyboard are connected to the network or not.
Double click the keyboard in IP-Tool and the system will pop up the web browser
to connect to the keyboard.
You can check the system information. Click "logout" in the top-right corner and log out
the IE client.
7 Web
22
Advertisement
Table of Contents
