Table of Contents
Advertisement
3 PTZ Mode
3.1 Mode Setup
There are 3 different modes to select from. Platform mode, PTZ mode and Serial Port.
Select PTZ mode and press "Enter" to select. Some models may connect 256 PTZs and
control PTZs which support ONVIF.
Tips: Some models support a default mode (platform mode or PTZ mode), it will
restore to the last working mode after restart. In PTZ mode, you only need to select
operational PTZ, you do not need to choose the output and the window, and the
other operations are similar to the platform modes.
3.2 PTZ IP Setup
Go to Network Setup to select "PTZ IP Setup" and press "Enter." Then set the IP address,
port, name, password of the PTZ selected.
v IP address: Enter the IP address of the PTZ. This IP address must be in the same local
network segment with the local IP address of the network keyboard.
v Port: The default port is 80 (the http port of the PTZ).
v Name and password: The name and password must be the same with that of the PTZ.
v Test: To test if the PTZ is online.
v Clear: To clear the information of the PTZ (Only some models support this function).
3.3 PTZ Operation
After setting up the IP address, port, name, and password of the PTZ you can control the
PTZ by the joystick or PTZ controller keys. Please see 4.8 PTZ Control for more details.
9
Advertisement
Table of Contents
