Table of Contents
Advertisement
Camera group settings: Go to the channel group setting interface to create a channel
(camera) group and set its dwell time.
Note: The effective value is from 1 to 999999. When entering "0" and then pressing
"CAM-G", it means stopping the auto-switching of the group in the specific window and only
playing the image of the current camera. Enter "0" again to stop playing.
When a channel group has played on a window, this group will be bound to this window.
You should delete this group so that another group can be played on this window.
5.5 Set and Call Macro
A macro is used to provide a shortcut to execute a group of consecutive actions. A macro
includes a maximum of 50 key orders. Macro instructions are saved in the keyboard. The
setting steps of macro are as follow.
1. Enter the digital number and then press and hold "MACRO" key to set macro. For
example, enter "2" and press "MACRO" key for more than 2 seconds to set NO.2 macro.
2. Enter a series of keys. For example, enter "1" and press "MON", enter "2" and press
"WIN", enter "2" and press "CAM".
3. Press "Enter" to complete the macro setup.
Input digital number and then press "MACRO" to call NO. 2 macro instruction. Moving the
joystick down will display all information of this macro instruction. Press the "ESC" key on
the keyboard to return to the main menu of the keyboard.
5.6 PTZ Control
Only when the PTZ is inputted into the window and there is no sequence display in this
window, can the PTZ control be effective—that is, the camera input to this window must be
a PTZ device (or speed dome).
5.6.1 Move or Stop
The setting steps are as follow.
15
Advertisement
Table of Contents
