Table of Contents
Advertisement
5 Decoding
Before using the network keyboard to control video output of the decoder, please make sure
the authentication server, media transfer server, storage server, alarm server and TV wall
server of the Transcendent VMS all starts, and they are all connected with the decoder.
Note: Here we only use platform mode as an example. If you choose the same
monitor (window or camera), you can skip the steps of inputting the monitor (window
or camera).
5.1 Call Layout
You may set the plan in advance and then call it through network keyboard. The operation
steps are as follows.
1. Select a TV wall. For example: enter "1" and then press "MON" key to select No. 1 TV
wall.
2. Select a plan (layout). For example: enter "1" and then press "LAYOUT" key to select
Layout 1.
To set a Plan: Go to the TV wall view interface and then select the plan tag to add a plan.
Double click the plan name to show the plan. Then drag the monitoring points to the
corresponding window respectively to decode images. After that, click "Save" or "Save As"
to save this plan. When controlling plans, the number of the plan can be viewed through
clicking TV Wall ManagementàTV Wall ViewàTV Wall Plan. You can also edit this plan in
this interface. The setting steps are as follows: In the TV Wall Plan interface, click
beside the plan name to edit it. You can call the saved plan by entering number and
pressing "LAYOUT" on the network keyboard. The effective value is from 1 to 9999.
12
Advertisement
Table of Contents
