Setup; Startup The Keyboard; System Setup; Password Setup - Vitek VT-TKBD11 Operating Manual

2 Setup

2.1 Startup the Keyboard

Connect the network cable to the keyboard and then connect the power. After the device
starts, please enter the default password (123456), and then press "Enter" key to go to main
interface (see left figure). Press the "Setup" key to go to the system setup menu (see right
two figures).

2.2 System Setup

You can move the joystick up or down to see all system setup menus.

2.2.1 Password Setup

Select the password setup menu and press "Enter" key to go to the password setup.
Enter the old password by moving the joystick right one by one (the default password is
123456). Select the new password by moving the joystick down and then enter the new
password as the mentioned above. Finally confirm the new password and press "Enter" key
to save the settings. If you want to change the inputted number, please move the joystick to
the current position to change the current number. If you want to cancel the inputted number,
you can press "0" two times. Press the "Enter" key to save the new password. Press the
"Cancel" key to return to the previous menu.
5