Set Or Call Preset; Create, Call Or Stop Cruise/Track - Vitek VT-TKBD11 Operating Manual

1. Select a TV wall. For example, enter "1" and press "MON".
2. Select a window. For example, enter "3" and press "WIN".
3. Control the speed dome/PTZ by moving the joystick. When moving the joystick back to
the original place, the speed dome stops moving.
Note: The camera input in the above example of NO. 3 window must be a PTZ device (or
speed dome), or the calling is invalid. The effective value of the preset is from 1 to 255. The
effective value of the cruise is from 1 to 8. The effective value of track is from 1 to 4. If the
calling number is beyond the range, an invalid tip will be displayed on the screen.

5.6.2 Set or Call Preset

To set preset
1. Select a TV wall. For example, enter "1" and then press "MON".
2. Select a window. For example, enter "3" and then press "WIN".
3. Set the position of the preset by moving joystick.
4. Press the digital number on the keyboard to select the number of preset. Then press
"PRESET" for more than 2 seconds to set the preset. For example, enter "1" and then press
"PRESET" for more than 2 seconds to set the NO.1 preset.
To call preset
1. Select a TV wall. For example, enter "1" and press "MON".
2. Select a window. For example, enter "3" and press "WIN".
3. Select a preset. For example, enter "1" and press "PRESET".

5.6.3 Create, Call or Stop Cruise/Track

To create cruise
1. Select a TV wall. For example, enter "1" and press "MON".
2. Select a window. For example, enter "3" and press "WIN".
3. Enter the cruise number on the keyboard and then press and hold "CRUISE" for more
than two seconds.
4. Enter digital number, press "PRESET" and then press "ENTER" to save the settings.
16