Default Setup; Question Setup; Playback Set; Ptz Setup - Vitek VT-TKBD11 Operating Manual

subnet mask is 255.255.255.0.
v Default GW: The default gateway is 192.168.1.1. Please input it according to the actual
network.
v DNS server: The default DNS server is 8.8.8.8. Please input it according to the actual
network.
v Alternate server: The default alternate server is 4.4.4.4. Please input it according to the
actual network.
v HTTP port: The default http port is 4000. Please input it according to the actual network.
PLAT IP Setup
Ø
Select "PLAT IP setup" and press "Enter" to set the PLAT IP address.
v IP address: Enter the IP address of the TV Wall Client of the Transcendent VMS.
v Port: The default port is 56789. The port must be the same with that of the TV Wall
Client.
v Name and password: The name and password must be the same with that of the TV
Wall Client.
v Test: To test if the keyboard is online.
PTZ IP Setup
Ø
Please see 3.2 PTZ IP Setup for details.

2.2.4 Default Setup

Select and press "Enter" to restore the system to factory default settings.

2.2.5 Question Setup

Select and press "Enter" to set the security question which can reset your password.

2.2.6 Playback Set

Only some models support this function.
Select and press "Enter" to set instant playback time when using the network keyboard to
control video output of the decoder.

2.3 PTZ Setup

Select and press "Enter" to go to the settings of the PTZ to set the speed and serial port
7