Advertisement
Quick Links
14% Scale Radio Control Model Airplane ARF
I N S T R U C T I O N M A N UA L
I N S T R U C T I O N M A N UA L
I N S T R U C T I O N M A N UA L
E n t i r e c o n t e n t s C o p y r i g h t 2 0
E n t i r e c o n t e n t s C o p y r i g h t 2 0 2 1 M a x f o r d U S A
Con g ratu l ati on s o n y o u r p u rch a s e
We invite you to enjoy the pride of ownership and the joy of flying this high
We invite you to enjoy the pride of ownership and the joy of flying this high
We invite you to enjoy the pride of ownership and the joy of flying this high
quality balsa, composite,
composite, and light-ply Almost-Ready-to-Fly aircraft.
History of the Antonov An-2 ............
Important safety precautions ..................................
Warranty, liability waiver, and return policy
Warranty, liability waiver, and return policy ......... 3
Specifications .......................................................
....................................................... 4
Antonov An-2
Antonov An
Radio Control Model Airplane ARF
Radio Control Model Airplane ARF
p u rch a s e o f M a xf o rd US A's s ca l e An to n o v An
TABLE OF CONTENTS
TABLE OF CONTENTS
............ .................... 2
.................................. 2
........................ 4
Page 1 of 13
Parts List ............................................................ 5
Parts List ............................................................
Assembly instructions ................................
........................................ 6
Setup and adjustments ................................
..................................... 12
Preflight checks ................................
............................................... 13
!
An to n o v An -2
ly aircraft.
Advertisement
Related Manuals for Maxford USA Antonov An-2
Summary of Contents for Maxford USA Antonov An-2
-
Page 1: Table Of Contents
We invite you to enjoy the pride of ownership and the joy of flying this high quality balsa, composite, composite, and light-ply Almost-Ready-to-Fly aircraft. ly aircraft. TABLE OF CONTENTS TABLE OF CONTENTS History of the Antonov An-2 ..........2 Important safety precautions ..............2 Parts List ............Parts List ............5 Warranty, liability waiver, and return policy Warranty, liability waiver, and return policy .. -
Page 2: Important Safety Precautions
HISTORY The Antonov An-2 (nicknamed "Annushka" or "Annie" and NATO reporting name “Colt”) is a single-engine biplane utility and agricultural aircraft that was designed in the USSR in 1946. The AN-2 saw use as a light utility transport, a parachute drop aircraft, an agricultural work aircraft and many other tasks suited to such a large slow-flying biplane. - Page 3 (the buyer or user of this product) are involved in any claim or suit, you will not sue Maxford USA or any of its representatives. If you do not fully accept the above liability and waiver, you may request a return merchandise authorization number (RMA#) as explained in item 2, below.
-
Page 4: Special Features Of This An-2 Arf
3. Returned merchandise that is accepted by Maxford USA for credit is subject to a 10% to 20% restocking fee (the final amount will be determined by Maxford USA upon receipt and examination of the returned merchandise). -
Page 5: Assembly Instructions
5- and 30-minute epoxy glue, thin and thick Cyanoacrylate (CA) adhesives, and a few common hand tools (such as long-nosed and diagonal or side-cutter pliers, Phillips screwdriver, etc.). A 50cc gas engine or equivalent glow engine or electric power system. ... - Page 6 Mark the top of the sliding motor mount box to make sure that you don't later put it in upside down. If necessary, use a covering iron to go over the covering material on all of the parts to eliminate any loose edges or air bubbles, then re-shrink the covering over all the open areas.
- Page 7 Test fit then install taill wheel T-bar linkage with rudder. Attach servo leads and lead them out of the horizontal stablizer, use recommended servo safety clips to secure the connection. Install elevator servo to the servo hatch.Elevator servo extensions will go through vertical stab and into the fuselage. Test fit left and right piece of horizontal stabilizer with veritical stab.
- Page 8 Assemble lower part of landing gear left and right, test fit wheels with self-locking nuts. Slide the white covering piece down to cover the suspension cylinder. Mount the upper end of suspension rod onto the side of wing shoulder. Test fit, and then glue the landing gear mounting tabs into the bottom of fuselage. Test fit, then mount the whole landing gear assemble to the fuselage.
- Page 9 Check your installation and test the suspension cylinder. When you are happy with everything, drip thin CA on the ends of each nut for extra security. ASSEMBLE THE WINGS: Install the wing centor section to the fuselage. This part will be permenantly installed on fuselage, and will not need to be removed when taking off wings for transportation.
- Page 10 black horns for ailerons and flaps. short black horns are non functional, and just for scale look. You may glue them to the bottom of top wing as shown below. Slide top and bottom wing rods in place, then test fit the left and right wing sets to the fuselage.
- Page 11 motor box position. Do not glue motor box to the fuselage at this time. If necessary, trim the openning of dummy engine for engine hub and shaft. Tests fit, then install the cowl and verify that the prop clears the cowl by about 1/2 inch and that the prop shaft is near the center of the opening in the dummy engine.
-
Page 12: Setup And Adjustments
Top side wing cables (shown in figure 1) will be mounted on the bottom of top wing panel. Bottom side cables (Shown in figure 2) will be mounted on the side of fuselage. Use turn buckles on fuselage side for easy disassembly. SETUP AND ADJUSTMENTS: Adjust and test all of the control surfaces. -
Page 13: Preflight Checks
Your safety depends on how you use and fly it. Any testing or flying of this model airplane is done entirely at your own risk. We thank you for choosing Maxford USA and we sincerely wish you many happy landings! Design and Manufactured by: Maxford USA RC Model Mfg, Inc.
Need help?
Do you have a question about the Antonov An-2 and is the answer not in the manual?
Questions and answers