Table of Contents
Advertisement
1.6
Summary of the ServeRAID-MR10i SAS/SATA Controller
Characteristics
The ServeRAID-MR10i controller uses Fusion-MPT™ architecture for all
major operating systems, thinner drivers, and better performance.
This section provides a summary of the features and benefits of the
ServeRAID-MR10i SAS/SATA controller. It contains information on SAS
features, SATA II features, PCI performance, integration, usability, and
flexibility.
The ServeRAID-MR10i controller includes the following features:
•
PCI Express x8 lane width
•
PCI Express performance up to 2.5 Gbits/s per lane
•
Support for 128-, 256-, or 512-Mbyte DDR2 667 MHz on-board
SDRAM intelligent battery backed module
•
Two internal connectors
•
Support for RAID levels 0, 1, 5, 6, 10, 50, and 60
•
Advanced array configuration and management utilities
•
Online RAID level migration
•
Drive migration
•
Drive roaming
•
Media scan
•
No reboot necessary after expansion
•
More than 200 Qtags per array
•
Hardware clustering support on the board
•
User-specified rebuild rate
•
32-Kbyte nonvolatile random access memory (NVRAM) for storing
RAID system configuration information; the MegaRAID SAS firmware
is stored in flash ROM for easy upgrade.
Summary of the ServeRAID-MR10i SAS/SATA Controller Characteristics
1-9
Advertisement
Table of Contents
