Advertisement
Beech Ovens
Duck Oven Operation Manual
Gas Control Cabinet Functions
Burner 1-
Reset Button &
Run / Fault
Indicator.
Main Control Switch
The Main Control Switch is an illuminated push button:
ON / OFF
Both temperature controller & burner/s are
switched on & off at the same time by the Main
Control Switch. The Temperature Controller will
show the current oven temperature (PV) and the
set point temperature (SV). The current oven
cavity temperature (PV) is monitored at the stone
hearth (floor) level. The actual oven cavity
temperature will be higher than indicated. This is
useful if firing on timber to easily see the cooking
temperature.
Main Control Button illuminated
green to show gas system is on.
The Gas Control Cabinet supply switch should always be set to OFF when any
service work or inspections occur. Disconnect power from the wall socket. All
service work should be carried out by a qualified and authorized technician.
Page 2
Burner 2-
Reset Button &
Run / Fault
Indicator.
Confidential and Proprietary
Flue Over-Temperature,
Pressure Switch
Indicators
Main Control
Button & Indicator.
ON / OFF
21/03/2022 (C)
Auxiliary Output 2
– ON/OFF Button
& Indicator
(Spotlight)
Digital
Temperature
controller
Advertisement
