Mazda MX-30 2020 Owner's Manual page 460

Table of Contents

Advertisement

Use only a Mazda-genuine tyre valve
cap:
Use of a non-genuine part is
dangerous as the correct tyre air
pressure cannot be maintained if the
tyre valve becomes damaged. If the
vehicle is driven under this condition,
the tyre air pressure will decrease
which could result in a serious
accident. Do not use any part for the
tyre valve cap that is not a
Mazda-genuine part.
Inspect all tyre pressures monthly when
the tyres are cold. Maintain
recommended pressures for the best
ride, handling, and minimum tyre
wear.
Refer to the specification charts (page
9-5).
NOTE
Always check tyre pressure when
tyres are cold.
Warm tyres normally exceed
recommended pressures. Do not
release air from warm tyres to adjust
the pressure.
Underinflation can cause reduced
energy efficiency, uneven and
accelerated tyre wear, and poor
sealing of the tyre bead, which will
deform the wheel and cause
separation of tyre from rim.
Overinflation can produce a harsh
ride, uneven and accelerated tyre
wear, and a greater possibility of
damage from road hazards.
Keep your tyre pressure at the correct
levels. If one frequently needs
inflating, have it inspected.
Owner Maintenance
▼ Tyre Rotation
WARNING
Rotate tyres periodically:
Irregular tyre wear is dangerous. To
equalize tread wear for maintaining
good performance in handling and
braking, rotate the tyres periodically or
sooner if irregular wear develops.
Please refer to Scheduled maintenance
for your tyre rotation interval.
During rotation, inspect them for
correct balance.
NOTE
Because your vehicle is not equipped
with a spare tyre, you cannot do a tyre
rotation safely with the jack that comes
with your vehicle. Have an expert
repairer (we recommend an
Authorised Mazda Repairer) perform
tyre rotation.
1. Forward
Do not include (TEMPORARY USE
ONLY) spare tyre in rotation.
Maintenance and Care
6-27

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents