Mazda MX-30 2020 Owner's Manual page 258

▼ Cancelling the System
The LDWS can be set to inoperable.
(If only the LDWS is turned off)
Refer to the Settings section in the
Mazda Connect Owner's Manual.
(If the LDWS is turned off by
operating the i-ACTIVSENSE OFF
switch)
Refer to i-ACTIVSENSE OFF Switch
on page 4-72.
NOTE
If the power switch is switched OFF
while you have cancelled the system
using the i-ACTIVSENSE OFF switch,
the system is automatically enabled the
next time the power switch is switched
ON. However, if the system is
cancelled using [Settings] in Mazda
Connect, the system is not
automatically enabled.
Blind Spot Monitoring
(BSM)
▼ Blind Spot Monitoring (BSM)
The BSM is designed to assist the driver
in checking the area to the rear of the
vehicle on both sides during lane
changes by notifying the driver of the
presence of vehicles approaching from
the rear in an adjacent lane.
BSM operation
The BSM detects vehicles approaching
from the rear while travelling in the
forward direction at a speed of 30
km/h (19 mph) or faster and notifies
the driver by turning on the BSM
warning indicator light and displaying
the vehicle detection screen.
If the direction indicator lever is
operated to signal a turn in the
direction in which the BSM warning
indicator light is illuminated while the
approaching vehicle is detected, the
BSM notifies the driver of possible
danger flashing on the BSM warning
indicator light, and by activating the
warning sound and the warning screen
indicator display.
When Driving
i-ACTIVSENSE
4-91