Table of Contents
Advertisement
OTHER SETTINGS
To set the volume level
1.
In a REC mode or the PLAY mode, press
[MENU].
2.
Select the "Set Up" tab, select "Sounds", and
then press [ ].
3.
Use [ ] and [ ] to select "Volume".
4.
Use [ ] and [ ] to specify the volume setting
you want, and then press [SET].
• You can set the volume in the range of 0 (no sound)
to 7 (loudest).
NOTE
• The initial default volume setting is 3.
Specifying an Image for the Startup Screen
You can specify an image you recorded as the startup
screen image, which causes it to appear on the monitor
screen for about two seconds whenever you turn on the
camera in a REC mode.
1.
In a REC mode or the PLAY mode, press
[MENU].
2.
Select the "Set Up" tab, select "Startup", and
then press [ ].
3.
Use [ ] and [ ] to display the image you want
to use as the startup image.
4.
Use [ ] and [ ] to change the setting, and
then press [SET].
To do this:
Use the currently displayed image
as the startup screen image
Disable the startup screen
187
Select this setting:
On
Off
Advertisement
Table of Contents
