Formatting Built-In Memory - Casio Exilim EX-P700 User Manual

OTHER SETTINGS
• Mass Storage (USB DIRECT-PRINT) causes the
camera to see the computer as an external storage
device. Use this setting for normal transfer of images
from the camera to a computer (using the bundled
Photo Loader application).
• PTP (PictBridge) simplifies the transfer of image data
to the connected device.

Formatting Built-in Memory

Formatting built-in memory deletes any data stored in it.
IMPORTANT!
• Note that data deleted by a format operation cannot
be recovered. Check to make sure you do not need
any of the data in memory before you format it.
• Formatting built-in memory deletes all files, including
files in the FAVORITE folder (page 182), protected
files (page 181), and BESTSHOT user setups (page
115).
• The startup screen image (page 187) and the power
down image (page 188) are deleted by formatting
memory.
1.
Check to make sure there is no memory card
loaded in the camera.
• If there is a memory card loaded in the camera,
remove it (page 202).
2.
In a REC mode or the PLAY mode, press
[MENU].
3.
Select the "Set Up" tab, select "Format", and
then press [ ].
198