PRINTING IMAGES
13.
The camera will turn off automatically when
printing is complete. After this happens,
disconnect the USB cable from the camera.
To print a group of images
1.
Use the DPOF procedure on page 207 to
specify the images in file memory that you
want to print.
2.
Perform steps 1 through 10 of the procedure
under "To print a single image" on page 210.
3.
On the print menu, use [ ] and [ ] to select
"DPOF", and then press [SET].
4.
On the camera's monitor screen, use [ ] and
[ ] to select "Print", and then press [SET].
• This starts printing and displays the message
"Busy.... Please wait..." on the monitor screen. The
message will disappear after a short while, even
though printing is still being performed. Pressing any
of the camera's buttons while printing is in progress
will cause the message to reappear.
• The print menu will appear when printing is
complete.
• This automatically starts printing of the images you
specified with the DPOF procedure.
213