Chapter 2 Parts And Their Functions; Power Supply And Accessory Mounting Section - Panasonic AJ-SPX800 Operating Instructions Manual

Chapter 2 Parts and their Functions

2-1

Power Supply and Accessory Mounting Section

POWER switch
Used to turn on/off the power.
Battery mount
A battery pack from Anton/Bauer is mounted here.
DC IN (external power input) socket (XLR, 4P)
To operate your AJ-SPX800P on AC power, the AC adaptor
AJ-B75 (optional accessory) must be connected to this
socket.
BREAKER switch
When an excessive amount of current is fed through the
video camera-recorder, due to any abnormal event, the
breaker automatically turns off the power in order to protect
the device.
After the interior of the video camera-recorder has been
checked and/or repaired, this button must be depressed. If
there is no unusual reaction, the unit can be powered-up.
GPS connector
This connects the optional GPS unit AJ-GPS900G.
Shoulder strap fittings
The shoulder strap is attached here.
Light shoe
A video light or similar accessory can be attached here.
Lens mount (bayonet type)
The lens is attached here.
Lens lever
Lower this lever to lock the lens to the lens mount.
10
Lens mount cap
To remove the cap, raise the
When the lens is not mounted, replace the cap.
Lens cable/microphone cable clamp
This clamp secures the lens and microphone cables.
Tripod mount
When you want to mount the AJ-SPX800P on a tripod, the
optional tripod attachment (SHAN-TM700) is attached here.
LENS jack (12-pin)
The lens connection cord is connected here. For a detailed
description of your lens, see the relevant manufacturer's
instruction manual.
lens lever.