Setting The Thumbnail Display Mode; Properties; Clip Property - Panasonic AJ-SPX800 Operating Instructions Manual

6-12 Setting the Thumbnail Display
Mode
The thumbnail display mode can be customised to suit your
preferences.
1
Press the THUMBNAIL button.
The thumbnail screen appears on the LCD monitor.
2
Press the MENU BAR button. The pointer moves to the
menu bar.
3
From the menu bar, select THUMBNAIL
The following screen appears.
MARKER IND.:
Switches the shot mark marker between indication and no
indication (ON/OFF). The factory setting is ON (indication).
VOICE MEMO IND.:
Switches the voice memo marker between indication and
no indication (ON/OFF). The factory setting is ON
(indication).
WIDE IND.:
Switches the wide marker between indication and no
indication (ON/OFF). The factory setting is ON (indication).
DATA DISPLAY:
The time display field of the clip offers a choice of Time
Code (TC), User Bits (UB), Shooting Time (TIME) or
Shooting Date (DATE)/Shooting Time and Date (Time
DATE). The factory setting is Time Code.
DATE FORMAT:
You can specify the display order for the shooting date as
either Year/Month/Day (YMD), Month/Day/Year (MDY) or
Day/Month/Year (DMY). The factory setting is Year/Month/
Day.
This setting is reflected in the recording date shown in the
clip property and the shooting date shown when DATE is
selected under the item DATA DISPLAY.
THUMBNAIL SIZE:
For the size of thumbnails displayed on one screen, either
LARGE (3 2 thumbnails displayed) or NORMAL (4
thumbnails displayed) can be selected. The factory default
value is NORMAL.
EXIT:
Returns to the previous menu.
82
6-13
The clip's properties and the P2 card's status are displayed.
6-13-1
From the menu bar, select PROPERTY
The following screen appears.
SETUP.
Clip Number
Thumbnail
Slip Information
Displays the number of markers and voice memos attached
to the clip.
The
protected P2 card.
Slot Number
Clip Information
Displays detailed information about the clip.
START TC:
START UB:
TIME
DATE:
DURATION:
CODEC: The recording format of the clip.
3

Properties

Clip Property

mark appears if the clip is recorded on a write-
The time code value at the start of the recording.
The user bit value at the start of the recording.
The time at the start of the recording.
The date of the recording.
The time length of the clip.
CLIP PROPERTY.