GAOMON S620 Installation page 5

Pen tablet

Hide thumbs Also See for S620:

Any suggestions and questions, please feel free to tell us. You can find us from ► 【 GAOMON

SUPPORT TEAM：

https://www.gaomon.net/after-sales/

1. Please use Android phone/tablet in portrait mode.

2. Please make sure your phone/tablet OS is running Android OS 6.0 or later, and supports OTG

function.

3. For some models, you need to go to phone or tablet "Settings", then enable "OTG" function.

4. You may need purchase a USB adapter to make GAOMON tablet connect with your Android

phone/tablet. For example a Type-C to USB adapter, or Micro USB to USB adapter, depending on the

USB type of your device have.

Notice: For more information on enabling OTG function, please visit:

blog.gaomon.net/faq/solutions_about_otg_functions.

Notes:

1. The pen tablet can work without installing any driver into your phone/tablet.

2. Once the tablet connected to your Android phone via USB cable, the tablet will automatically

enter the phone mode, in which the pen can only work in the left gray area(101 x 63.1mm).

3. If it fails to recognize the tablet as the phone mode, please press the button ①,③ at the same

time for 3 seconds to enter phone mode.

4. Please note that the express keys on the pen tablet and the buttons on the pen are not supported

in phone mode.

Any suggestions and questions, please feel free to tell us. You can find us from ► 【 GAOMON

SUPPORT TEAM：

https://www.gaomon.net/after-sales/

】.

For Android Phone/Tablet

】.